Inexpensive high quality shred machines
Came across these shred beasts... they have some really nice designs and I have heard nothing but good things about them. They seem to have a pretty solid customer base. So if you guys are looking for a new addition, give this a look and if you guys have had an opportunity to play one, post away, let us know.
The manufacturer is called Agile and they are available through www.rondomusic.com. They have custom shops at around 800 bux. Wow thats not bad at all compared to 4G's at Jackson and 5Gs at ESP
I'm digging this one a lot... just wished it was a fixed bridge with a solid color though...
specs:
Real Quilted Maple top and double cutaway light mahoganny arch top body
Mahogany Body
27" scale 5 piece maple neck-thu body construction
USA Made EMG 707 Pickups
Ebony fretboard with no markers. Position markers are located on the side of the neck.
24 Extra Jumbo 2.9mm frets and a 13.7" (350mm) radius neck for fast play
Grover Die Cast tuners
Floating Trem Licensed by Floyd Rose
Grover Die Cast tuners
Volume & tone controls and a coil tap
Reverse Headstock
Width of the neck at the nut: 1 7/8"; at the 22st fret: 2 3/16"
Uniform Neck Profile - For ultra fast playing - 21.5mm at the frest fret and 22mm at the 12th fret.
Overall length, including the strap button: 41";
Actual Weight is only 8.5 lbs
The manufacturer is called Agile and they are available through www.rondomusic.com. They have custom shops at around 800 bux. Wow thats not bad at all compared to 4G's at Jackson and 5Gs at ESP
I'm digging this one a lot... just wished it was a fixed bridge with a solid color though...
specs:
Real Quilted Maple top and double cutaway light mahoganny arch top body
Mahogany Body
27" scale 5 piece maple neck-thu body construction
USA Made EMG 707 Pickups
Ebony fretboard with no markers. Position markers are located on the side of the neck.
24 Extra Jumbo 2.9mm frets and a 13.7" (350mm) radius neck for fast play
Grover Die Cast tuners
Floating Trem Licensed by Floyd Rose
Grover Die Cast tuners
Volume & tone controls and a coil tap
Reverse Headstock
Width of the neck at the nut: 1 7/8"; at the 22st fret: 2 3/16"
Uniform Neck Profile - For ultra fast playing - 21.5mm at the frest fret and 22mm at the 12th fret.
Overall length, including the strap button: 41";
Actual Weight is only 8.5 lbs
Replies to This Discussion
-
Permalink Reply by Sonic Gihad on -
I like this one a lot!!!
It's an Agile Septor 727 (7x 27 scale)
neck-through Mahogany Body, Ebony fretboards, Grover tuners. This would kill with some EMG 707s or some Bare Knuckle pickups.
© 2009 Created by RoXin on Ning. Create a Ning Network!
